{rfName}
Ge

Licencia y uso

Icono OpenAccess

Citaciones

Altmetrics

Grant support

This research was funded by the Comunidad de Madrid through the "PANTOMIME" (APOYO-JOVENES-21-9FOMOQ-22-0CNGFM), "DISENO Y FABRICACION DE DISPOSITIVOS FOT & Oacute;NICOS" (BEAGALINDO-21-QU81R4-7-0QQBF3) and the "Ayudas para la realizacion de Doctorados Industriales de la Comunidad de Madrid" (IND2020/TIC-17424). The financial support to this study has also come from the Spanish Government, "ENHANCE-5G" (PID2020-114172RB-C22), "LC-LENS" (PDC2021-121370-C21), "DISRADIO" (TSI-063000-2021-83) and WOW-2D (PLEC2022-009381), as well as the Attract-IALL EU project G.A 101004462 and "CONCEPT-2D" (G.A. 101062995), financed by the European Union. In addition, authors are grateful to the European Space Agency (ESA) for the financial support received with the "Smart Heaters" project (4000133048/20/NL/KML). M.C.G is grateful to Spanish government grant (BG20/00136). The authors thank Prof. Jose Manuel Oton for his contribution in reviewing this article.

Análisis de autorías institucional

Ganazhapa, ByronAutor (correspondencia)Pereiro-Garcia, JavierAutor o CoautorArregui, Xabier QuintanaAutor o CoautorGeday, Morten AndreasAutor o CoautorCano-Garcia, ManuelAutor o Coautor

Compartir

Publicaciones
>
Artículo

Generation of arbitrarily patterned polarizers using 2-photon polymerization

Publicado en:Scientific Reports. 14 (1): 22550- - 2024-09-29 14(1), DOI: 10.1038/s41598-024-73946-z

Autores: Ganazhapa, B; Pereiro-García, J; Arregui, XQ; Geday, MA; Guadaño, G; Caño-García, M

Afiliaciones

LASING SA, C Julian Camarillo 26, Madrid 28037, Spain - Autor o Coautor
Univ Granada, Res Ctr Informat & Commun Technol CIT UGR, Dept Elect & Comp Technol, Granada, Spain - Autor o Coautor
Univ Politecn Madrid, ETSI Telecomunicac, CEMDATIC, Av Complutense 30, Madrid 28040, Spain - Autor o Coautor

Resumen

Patterned polarizers are prepared using liquid crystals (LC) doped with a black dichroic dye and in combination with a linear polarizer. The pattern is achieved with a nanostructured LC alignment surface, that is generated using a two-photon polymerization direct laser write (2PP-DLW). This technique creates a pattern of high-resolution grooves in the photoresist at any arbitrary angle. The angle governs the LC orientation at any substrate surface point, determining the transmitted light linear polarization angle. This paper presents the first use of a 2PP-DLW cured positive tone photoresist for dichroic dye-doped LC alignment. Two complementary photoresists have been employed: conventional negative tone SU-8 photoresist and, in this context novel, positive tone S1805 photoresist. The alignment quality of the polarizers has been assessed by analyzing the transmission using an additional polarizer. For SU-8, the resulting grayscale pattern and a contrast ratio (CR) of 14 has measured. The uniformity of the alignment has been measured to be 65% using normalized Shannon entropy (H). For S1805, a CR of 37 was measured, and a uniformity of 63% was obtained. 2PP-DLW allows for shaping complex patterns in submicron dimensions and for the fabrication of arbitrarily patterned polarizers and other LC devices.

Palabras clave

AlignmenFabricationLiquid-crystals

Indicios de calidad

Impacto bibliométrico. Análisis de la aportación y canal de difusión

El trabajo ha sido publicado en la revista Scientific Reports debido a la progresión y el buen impacto que ha alcanzado en los últimos años, según la agencia WoS (JCR), se ha convertido en una referencia en su campo. En el año de publicación del trabajo, 2024 aún no existen indicios calculados, pero en 2023, se encontraba en la posición 25/134, consiguiendo con ello situarse como revista Q1 (Primer Cuartil), en la categoría Multidisciplinary Sciences.

Impacto y visibilidad social

Desde la dimensión de Influencia o adopción social, y tomando como base las métricas asociadas a las menciones e interacciones proporcionadas por agencias especializadas en el cálculo de las denominadas “Métricas Alternativas o Sociales”, podemos destacar a fecha 2025-06-13:

  • La utilización de esta aportación en marcadores, bifurcaciones de código, añadidos a listas de favoritos para una lectura recurrente, así como visualizaciones generales, indica que alguien está usando la publicación como base de su trabajo actual. Esto puede ser un indicador destacado de futuras citas más formales y académicas. Tal afirmación es avalada por el resultado del indicador “Capture” que arroja un total de: 3 (PlumX).

Es fundamental presentar evidencias que respalden la plena alineación con los principios y directrices institucionales en torno a la Ciencia Abierta y la Conservación y Difusión del Patrimonio Intelectual. Un claro ejemplo de ello es:

  • El trabajo se ha enviado a una revista cuya política editorial permite la publicación en abierto Open Access.

Análisis de liderazgo de los autores institucionales

Existe un liderazgo significativo ya que algunos de los autores pertenecientes a la institución aparecen como primer o último firmante, se puede apreciar en el detalle: Primer Autor (GANAZHAPA JIMENEZ, BYRON OSWALDO) y Último Autor (CAÑO GARCIA, MANUEL).

el autor responsable de establecer las labores de correspondencia ha sido GANAZHAPA JIMENEZ, BYRON OSWALDO.